Welcome to Pyramids official website !

+86-510-88570126 sales@pyramidweld.com

Location: Home / Product / Orbital welding machine / Orbital Tube to Plate Welding > Orbital Tube to Plate Welding

Orbital Tube to Plate Welding


This machine adopts the PLC produced by Siemens to control and installs the software developed by our factory. The whole welding process is automatically completed according to the preset procedures and processes.

Control system man-machine interface, simple operation, full Chinese interface (English available), process parameters input through touch screen, simple and intuitive to use .

Main features   

This machine adopts the PLC produced by Siemens to control and installs the software developed by our factory. The whole welding process is automatically completed according to the preset procedures and processes.

Control system man-machine interface, simple operation, full Chinese interface (English available), process parameters input through touch screen, simple and intuitive to use.

Gantry three-dimensional adjustment cooperates with three-dimensional fine adjustment, suitable for welding intensive heat exchangers with small pipe diameter and pipe bridges.

The welding head adopts water-cooling positioned mandrel, to avoid inflow after the tube head melted.

The machine head can rotate 360 degrees on the horizontal surface, which is convenient for replacing tungsten and wire feed fine adjustment.

The water, electricity and gas of the machine head are not winded, and the welding torch can be continuously rotated to match the arc length to realize multi-layer welding.

The machine adopts Panasonic IGBT inverter controlled DC pulse power supply. High welding efficiency, stable performance, beautiful soldering.

The arc current is a pulse waveform, and each parameter can be set separately. The solution pool is easy to control, and the width and depth of the solution are uniform.

With 100 sets of program storage functions, each set of process parameters can be modified.

There are four welding methods: 1 welding one layer, no filling wire; 2 welding one layer, filling wire; 3 welding two layers, the first layer is not filled, the second layer is filled; 4 welding two layers, both are filled.

Our company has many years of experience in installation, commissioning, training and welding (special structure special order).

Technical data

Input power three-phase four-wire

380 10% V

Rated output capacity

13.9 KVA

Rated input current

19 A

Rated no-load voltage

73 V

Rated operating current

400 A

Current adjustment range

4-400 A

Rated load continuous rate

60%

Pulse width adjustment range

10-90%

Pulse frequency adjustment range

0.2-10 S

Pulse current waveform

Square wave

Current frequency adjustment range

More than 30 S

Welding torch speed

0.2-5 S

Wire speed

50-2000 mm

Weldable pipe outer diameter range

12-90 mm

Argon flow

Less than 15 min

Operating frame stroke

Horizontal movement stroke

1600 mm

Vertical movement stroke

1500 mm

Minimum welding height

500 mm

Welding structure



Product Inquiry

© Pyramid Industry Limited

Contact Us|Google Map